NEC Univerge SV 9500 - Page 201

192
• To Search by Telephone Number
STEP 1: Open the Directory screen (see TO ADD
NEW DATA).
STEP 2: Select Search.
Select an item by either of the following operations.
• Highlight an item by using or UP/DOWN soft key,
and then press , or OK soft key.
• Press key.
STEP 3: Select Tel Number.
Select an item by either of the following operations.
• Highlight an item by using or UP/DOWN soft key,
and then press , or OK soft key.
• Press key.
STEP 4: Enter a target telephone number.
After entering the number, press or OK soft
key.
STEP 5: Select a target name by pressing .
In the following Directory (Name List) screen,
you can make a call to the selected party by
pressing or Call soft key. If two or more tele-
phone numbers are assigned to an entry, a top
priority telephone number will be dialed.
1
1
1
2
[Directory]
3
4
0
Own Number
Delete All
Edit
OKMenu

Group Setting
Search
3
3
1
2
[Search]
3
4
Others
OKBack

Tel Number
Group
Name

Note:
Even if the telephone number is not entered to
the end, you can search for a telephone number.
Note:
If there is no entry corresponding to the entered
number, "No data" is issued on the screen.
Input a Telephone number.
[Tel Number]
OKBack
BK
1
[Directory]
Call
Back
OptionDetail
Abe Ichiro
Abe Sabro
Abe Kentaro