NEC Univerge SV 9500 - Page 246

237
Note 1: Before firmware version 3.0.3.0, the menu item of “3 Display” is as follows.
3 Data Backup/Restore Select this option to set the data required for the file backup/
restore.
-
1 Data Backup Select this option to select this option to specify the file name
to be backed up.
PersonalData.t
gz
2 Data Restore Select this option to specify the file name to be restored. PersonalData.t
gz
3 Server Address Select this option to enter an IP address of the FTP/TFTP
server.
0.0.0.0
4 Protocol Select this option to select a protocol of the server (either
FTP or TFTP).
FTP
5 FTP Settings Set necessary data when using FTP service. -
1 User ID Select this option to enter a user ID for the data backup via
FTP server.
-
2 Password Select this option to enter a password for data backup via
FTP server.
-
3 Folder Select this option to specify the destination directory of FTP
server.
-
Menu Item Description Default Value
3 Display Select this option to set up for the LCD display. -
1 Time Format Choose between 12-hour or 24-hour clock format. Automatic (12-hour format)
2 Local Volume Specify whether to display the following volume levels:
handset receiver volume, speaker volume, ringer tone
volume and LCD contrast.
Automatic (Enable)
Menu Item Description Default Value