247
• To disable Bluetooth
feature
STEP 1: Press the Connect key for several seconds
(More than three seconds when the
Bluetooth
feature is ON (the Connect
key is turn on)).
STEP 2: The Connect key turns off, and the
Bluetooth
feature turns OFF. The
mobile phone, which is connected to
Bluetooth
, will be forcibly
disconnected.
• Bluetooth
connection from DT830
Series/DT430 Series to mobile phone
Bluetooth
connection is manually or automat-
ically available between a terminal and a mo-
bile phone whose pairing process has been
completed. From the terminal, a Bluetooth
connection can be established only to the
most recently connected mobile phone.
• Automatic Connection
STEP 1:Be sure to confirm that Bluetooth
connection is ON (the Connect key lamp
lights red).
STEP 2:The most recently connected mobile
phone must be within the range of a
Bluetooth
connection (approximately
10 meters).
STEP 3: The Bluetooth
connection between the
terminal and the mobile phone is
established automatically.
Note:
If the connection process between DT830 Series/
DT430 Series and the mobile phone is performed
during pairing mode, the Bluetooth
feature cannot
be disabled.
Note:
When the Connect key has not been pressed for 10
minutes while the Bluetooth
adapter is connected
to the terminal, the Bluetooth
feature will
automatically turn OFF.
Note:
When Bluetooth
connection between the terminal
and the mobile phone is established during a
conversation, the voice communication is
interrupted due to a switch to the Bluetooth
output. You can return to the conversation after 8
seconds since the voice communication is
disconnected.
To Next Page
Loading...
