NEC Univerge SV 9500 - Page 45

36
• TO ACTIVATE HANDS-FREE
To Set hands-free On:
STEP 1: Press and key.
The LCD displays:
To Set hands-free Off:
STEP 1: Press and key. The LCD displays:
• CALL INDICATOR LAMP ON/OFF
You can choose to turn the call indicator lamp either on
or off during the call.
STEP 1: Press and key. The LCD displays:
• SELECT DIAL MODE
You can select one pattern from Normal, Dynamic Dial
Pad or Preset Dial to originate a call.
When only Dynamic Dial Pad is activated:
To Set/Reset Dynamic Dial Pad
STEP 1: Press and key. The LCD displays:
Note:
The call indicator lamp lights when used as a
Message Waiting Lamp, even when it is turned
off by the above operation.
DT430/410
Feature
5
4:26 PM MON 11 MAY 2015
HANDS FREE ON
Feature
6
4:26 PM MON 11 MAY 2015
HANDS FREE OFF
DT830
DT430/410
Feature
7
4:26 PM MON 11 MAY 2015
INDICATOR ON
4:26 PM MON 11 MAY 2015
INDICATOR OFF
Note:
When this feature is ON, you may initiate a call
by immediately dialing the number and the sta-
tion will go hands-free off-hook automatically. For
details, see TO ORIGINATE A CALL USING
SELECTIVE DIALING (DYNAMIC DIAL PAD,
PRESET DIAL).
DT830
DT430/410
Feature
8
4:26 PM MON 11 MAY 2015
Direct Dial Pad ON
4:26 PM MON 11 MAY 2015
Direct Dial Pad OFF