NEC Univerge SV 9500 - Page 64

55
STEP 5: Select Time Format.
Select an item by either of the following operations.
• Highlight an item by using or the UP/DOWN soft
key, and then press , or the OK soft key.
• Press key.
STEP 6: Make a selection from the following list.
Select an item by either of the following operations.
• Highlight an item by using or the UP/DOWN soft
key, and then press or the OK soft key.
• Press - key, and then press or the OK
soft key.
Note:
For SV9500 V1, Time Format is displayed
instead of Calendar Format. Select Time Format
and go to Step 6.
2
2
1
[Calendar Format]
2
OK
Back
Calendar Format

Time Format
No. Menu Item Meaning
0 Automatic
Follows the setting on the
system (default)
1 12 hour Indication 12-hour clock
2 24 hour Indication 24-hour clock
Note:
When selecting Automatic or not performing this
time format setting, 12-hour clock is automati-
cally applied.
Note:
Default setting is Automatic.
Note:
The enabled item is highlighted.
0
2
0
1
[Time Format]
2
OK
Back
12 hour Indication

24 hour Indication
Automatic