NEC Univerge SV9100 - Page 52

Issue 1.0
UNIVERGE SV9100
40
System Maintenance Manual
o ip info 8
This command shows the GCD-CP10 IP Address information entered in PRG10- 12.
o ip info 9 <slot number>
This command shows the VoIPU IP Address information entered in PRG84-05. The slot number should be
entered in hex.
Example:
IP INFO 9 8
[ VoIPU PKG IP Address ]
IP Addr (FEC2) : 172. 16. 0. 10
slot08 GW[1] Addr = 172. 16. 0. 20
slot08 GW[2] Addr = 172. 16. 0. 20
slot08 GW[3] Addr = 172. 16. 0. 20
slot08 GW[4] Addr = 172. 16. 0. 20
slot08 GW[5] Addr = 172. 16. 0. 20
slot08 GW[6] Addr = 172. 16. 0. 20
slot08 GW[7] Addr = 172. 16. 0. 20
slot08 GW[8] Addr = 172. 16. 0. 20
NIC : Auto Detect
Example:
[ NTCPU IP Info ]
IP Addr : 192.168. 1. 20
Sub Net Mask : 255.255.255. 0
Default Gatway : 192.168. 1.254 Time Zone 21
NIC : Auto Detect