NEC Univerge SV9100

Issue 1.0
UNIVERGE SV9100
4
System Maintenance
Flowcharts
Condition
Flowchart
A. System Down
1. No Internal Dial Tone to any Multiline
Terminal or SLT
A1
2. No LED or Display Indications on any
Multiline Terminal
A2
B. Partial Operations
1. Frequency Interference
B1
2. No or Intermittent CO/PBX Ring
C1
3. Call Dropping
C2
4. No Outside Dial Tone Access
C3
5. CO/PBX Dialing Problem: Cannot Dial Out
on CO
C4
C. Multiline Terminal Problems
1. Multiline Terminal Function
D1
2. Multiline Terminal Ringing
D2
3. Multiline Terminal Dial Tone Access
D3
D. Single Line Telephone Problems
1. No Dial Tone Access on SLT
E1
2. Ringing Problem on SLT
E2
3. No Dial Access to SLT Features
E3
E. Low Volume Problems
F1
F. External Paging Problems
G1
G. SMDR Output Problems
No Call Accounting System
H1