NEC Univerge SV9100

UNIVERGE SV9100
Issue 1.0
System Maintenance Manual
57
SECTION 11 ISDN LAYER 3 TRACE (MAIL IN 0 0 1 2)
A typical ISDN Layer 3 trace is shown:
9:56:48 >>
9:56:48 >>mail in 0 0 1 2
9:56:53 >>
Enter ISDN debug mode master current bid : 08H master current line : 00H
ACD Data Size error. or socket close...caps_service():Returns NORMAL caps_service():Returns NORMAL
ITR_NULL_P_STA: DES_ANSWER_FLAG CLEAR! ITR_NULL_P_STA: TM_DES_ANSWER_WAIT_L SET!
ACD Data Size error. or socket close...** CLR_ISDN_FLAG IS CALLED **
** LPORT_W = 00340015H **2 SET_CALL_REF CALLED! PHYSICAL_W
=0108HSET_CALL_REF: PRI =8003H
*** set_call_ref resource# : 1H ***
<<< prgrd1501.cpp(38) read_s_sta_clip_enable >>> port : 0, data : 1
SISDN:>>>>>>>>>>>>>>>>
F4 A1 04 01 01 00 USL(8,1),SETUP REQ
08 02 00 03 05 Callref:ORG(3),SETUP
04 03 80 90 A3 Bearer capability [speech]
18 03 A9 83 81 Channel identification
6C 02 00 81 Calling party number
7C 03 80 90 A3 Low layer compatibility
7D 02 91 81 High layer compatibility
R ISDN : <<<<<<<<<<<<<<<<
15 0B A1 0F 01 01 00 USL(8,1),MORE INFO IN
08 02 80 03 0D Callref:DES(3),SETUP ACKNOWLEDGE
18 03 A9 83 81 Channel identification
1E 02 82 88 Progress indicator PHYSICAL_W =0108H itr_cint_mrifind called
S ISDN : >>>>>>>>>>>>>>>>
F4 A1 0E 01 01 00 USL(8,1),INFO REQ
08 02 00 03 7B Callref:ORG(3),INFORMATION
70 02 81 32 Called party number [2]
S ISDN : >>>>>>>>>>>>>>>>
F4 A1 0E 01 01 00 USL(8,1),INFO REQ
08 02 00 03 7B Callref:ORG(3),INFORMATION
70 02 81 30 Called party number [0]
S ISDN : >>>>>>>>>>>>>>>>
F4 A1 0E 01 01 00 USL(8,1),INFO REQ
08 02 00 03 7B Callref:ORG(3),INFORMATION
70 02 81 30 Called party number [0
Enter ISDN Debug Mode
ISDN trunk port 21
ISDN Setup Sent
Blade in Slot 8, CCT 1 used Call
Ref = 3
Speech call
No calling party number
included.
Network returns
Setup Acknowledge
Use the Call Ref to
follow the call
through.
User dials 200