NEC Univerge SV9100

UNIVERGE SV9100
Issue 1.0
System Maintenance Manual
65
Saving DIMLOG and DIMLAST files using KeyTelPro
Copies the files from the SD card installed in GCD-CP10 card to the USB memory stick plugged into the USB
socket of the GCD-CP10 card
1. Ensure a USB Memory stick is installed to the USB of the GCD-CP10 card
2. Enter system programming via KeyTelPro
3. Enter CMD 90-03-02
90-03-02
DIM log Save YES:1 _1
< >
4. Enter 1 and press Transfer key
Saving DIM log will be displayed for a few seconds
Saving DIM log
5. Then display will step to the next CMD when the save is complete
90-04- M’tenance
Load Data 01
Back Select
If the save fails the display will show
Fail to write
Fail to write can occur if the USB is in use for any other function, eg DIM saving to USB via Maintenance
Service Code