169
STEP 16:The display goes back to the Edit screen. Se-
lect Illumination.
Select an item by one of the following operations.
• Highlight an item by using , and press ,
or OK.
•Press .
STEP 17:Select a desired color of the Call Indication
lamp.
Select an item by one of the following operations.
• Highlight an item by using or UP/DOWN soft key,
and press or OK.
• Press the digit key of desired number, and press
or OK.
For example, press + to select White.
Note
You can set ringer tone for calls routed from the specific
name (calling party) here. Ringer Tone type can be set
for “Name”, “Group” and “Telephone set”. The ringer
Tone type set for “Name” has higher priority than the
types set for “Group” and “Terminal set”.
Note
Set Default when you don’t want to change the ringer
tone here. The setting for “Group” or “Telephone set” is
applied. Also, when Automatic is set, Tone Type 1 is
automatically applied.
TIP
For details on each ringer tone type, see TO SET
RINGER TONE.
1
2
3
4
OK
Back
5
6
7
8
1/3
[Ring Tone]
Automatic
Default
Tone Type 1
Tone Type 3
Tone Type 2
Tone Type 4
Tone Type 5
Tone Type 6
9
0
OK
Back
2/2
[Edit]
Save
0
No
Illumination
1
2
3
4
OKBack
5
6
7
8
1/2
Automatic
Default
[Illumination]
Disable
Yellow
Red
Green
Blue
Light Blue
To Next Page
Loading...
