Establish Communication with the XN120
11
Establish Communication with the XN120
Before you can upload/download the XN120 configuration you will need to establish
communication between your PC and the XN120 system.
The method of communication depends on how you are connection to the XN120: Ethernet,
Serial, Remote via DDI to 830 or remote via a modem.
You do not need to establish communication if you want to edit/view a configuration off line.
For example, most users prefer to download the entire configuration from the XN120 and then
disconnect the communication; make any changes off line and then re-connect to upload to
the XN120.
This is especially useful for remote access, as it will save on call costs.
To Next Page
Loading...
