NEC XN120 - Analogue Outgoing Trunk Access

Making Changes to the Configuration
55
Analogue Outgoing Trunk Access
Description
Assign which trunk is selected when user dials 9, use speed dial or auto trunk seize
Assign access to other groups, if all lines busy in own group.
Assign trunk group for each extension.
This can be used for dedicated lines such as faxes or private line
Pre config - initial data
All extension access - Route 1 (only)
Route 1 Access Trunk group 1
All trunks in trunk group 1
Trunks selected from Line 1 -up
Options
Remove trunks, which are not used by setting as trunk group 0.
(IMPORTANT – If not removed-users can select trunk ports-which are not connected)
Select which order trunks are selected - change to reverse order.
Assign access to extensions and other trunk groups or for dedicated lines
Alog pre
config
✔
ISDN pre
config
Dial 9
To Route
Route to
Trunk Grp
Group to
Trunk
Priority Priority
'
21-02
Per Extn
-
Per Mode
14-06
Trunk
group to
Route
14-05-
Item 1
Group
No.
14-05-
Item 2
14-06
Item
1-4
'