PCPro Via Ethernet
12
PCPro Via Ethernet
You can use PCPro to establish the communication to the XN120 if you are connected via a
LAN cross cable or the customer’s LAN.
1 Click Communication Tab, click Connect (or press F5).
2 In the Connection window, which appears, enter the XN120 user name, password, and
IP address defined in Program 10-12-01 (Default 172.16.0.10)
Installer level Password – CASE SENSITIVE
User Name – TOPAZ
Password – 12345678
3. Click CONNECT.
Communication is established between PCPro and XN120 system via the LAN connection
and Main Screen will appear. The Connect icon greys out and the Upload, Download &
Disconnect icons become available)
If there is no connection available to the
XN120 you will see an error message
indicating that PCPro is unable to connect to
the KSU. Check your cables and Network
Connection settings.
To Next Page
Loading...
