NEC XN120 - ISDN Outgoing Trunk Access

Making Changes to the Configuration
58
ISDN Outgoing Trunk Access
Description
Assign which trunk is selected when user dials 9, use speed dial or auto trunk seize
Assign access to other groups, if all lines busy in own group.
Assign route for each extension
This can be used for dedicated lines such as faxes, private line or to separate analogue and
ISDN lines
Pre config - initial data
All extension access - Route 1 (only)
Route 1 access trunk group 1 (only)
Trunks 1 to 3 = Trunk group 25
Trunks 4 to 7 = Trunk group 1
Trunks selected from Line 7 down
Options
Remove trunks, which are not used by setting as trunk group 0.
(IMPORTANT – If not removed-users can select trunk ports-which are not connected)
Select which order trunks are selected - change to reverse order.
Assign access to extensions and other trunk groups, dedicated lines or to separate analogue
and ISDN trunks
Alog pre
config
ISDN pre
config
✔
Dial 9
To Route
Route to
Trunk Grp
Group to
Trunk
Priority Priority
'
21-02
Per Extn
-
Per Mode
14-06
Trunk
group to
Route
14-05-
Item 1
Group
No.
14-05-
Item 2
14-06
Item
1-4
'