NEC XN120 - Uploading Data to XN120

Uploading Data to the XN120
32
Uploading data to XN120
Uploading Pre Config + edited data
3 Click Communication Tab, click Connect.
4 In the Connection window that appears enter the XN120 user name, password, and
EXIFU IP address defined in Program 10-12-01 (Default 172.16.0.10 if your PC is
connected to the Ethernet socket of the EXIFU card).
Refer to a previous section of this guide for alternative connection methods.
Installer level Password – CASE SENSITIVE
User Name – TOPAZ
Password – 12345678
3. Click CONNECT.
The PCPro and XN120 system is connected by LAN connection and Main Screen will appear.
If there is no connection available to the
XN120 you will see an error message
indicating that PCPro is unable to connect to
the KSU. Check you cables and Network
Connection settings.