NEC XN120 - Department Groups; Program 16-02-01

Downloading Data to the XN120
35
Downloading data From the XN120
Download Pre Config + edited data
1. Click Communication Tab, click Connect.
2. In the Connection window, which appears, enter the XN120 user name, password, and
EXIFU. IP address defined in 10-12-01 (Default 172.16.0.10 if your PC is connected to the
Ethernet socket of the EXIFU card).
Refer to a previous section of this guide for alternative connection methods.
Installer level Password - CASE SENSITIVE
User Name – TOPAZ
Password – 12345678
3. Click CONNECT.
The PCPro and XN120 system is connected by LAN connection and Main Screen will appear.