Using the Pre Config Files
27
Any addition cards the following will need to be changed to allow TRUNK ACCESS
Example KSU 3x8, 308 card, 4BRIU (See example Page XX)
ISDN Trunks Start 7 to 14
Trunks and order
14-05 Trunk groups and order
Covered in “Outgoing trunk access”
14-06 Route 1 Access section of manual
10-03-07 Assign P-P
Function Key Program and copy command
1. 15-07-01 Extension 200
2. Step to Function Key….11
3. Delete Key 19 (Night service key) 09
4. Step back to Function key…..1
5. Edit --- Trunk Keys to new set up ----------Start screen
To Next Page
Loading...
