Making Changes to the Configuration
50
Item No Item Data Default
01
Name
Option name for the group
Up to 12 Characters
02
Calling Cycle
Priority or UCD hunting
0: Priority Routing
1: Circular Routing (UCD)
0
03
Routing when Busy
Internal calls to a busy member of a
group can receive busy tone or step to
the next member.
0: Hears Busy tone
1: Routes to idle member
0
04
Hunting Mode
Hunt once around the group or hunt
continuously
0: stop at last member
1: Circular (hunt
continuously)
1
05
Extension Group All Ring mode
Operation
Calls to the group ring all members
either manually by the user dialing a
service code or automatically when the
call arrives.
0: Manual
1:Automatic
0
06
Extension Group withdraw mode
Do not change this option, leave at 0.
0: Disable (Camp on)
1:Enable (Overflow)
0
07
Call Recall Restriction For STG
Do not change this option, leave at 0.
0: Disable (Recall)
1:Enable (Non Recall)
0
08
Maximum Queuing Number of
extension group call
You can limit the quantity of trunk calls
that will queue at a busy group
0-32 0
09
Extension Group Call No Answer
Time
Set how long each member will ring
before the call steps to the next
available member.
0-64800 15
10
Enhanced Hunting Type
Do not change this option, leave at 0.
0:No Hunting
1:Busy
2:No answer
3 Busy/No answer
0
To Next Page
Loading...
