Making Changes to the Configuration
66
Incoming trunk type
1. Click on 22-xx to expand tree
2. Click on 22-02
3. Locate Trunk (ISDN 2 will start from Trunk 4)
4. Use Drop down box to select DID for each mode of service
5. Save changes (Apply)
6. Step to next Trunk and repeat until all ISDN trunks assigned
7. Click 22-xx to close tree
ISDN trunk group to Table area
1. Click on 22-xx to expand tree
2. Click on 22-13
3. Locate Trunk Group
4. Edit Table area as Trunk group 1
5. Save changes (Apply)
6. Click 22-xx to close tree
To Next Page
Loading...
