NEC XN120 - Page 9

Setting up TCP/IP Addressing on your PC
9
3. In the list if items, Click on the INTERNET PROTOCOL (TCP/IP) and then Click on
PROPERTIES.
In the Internet Protocol (TCP/IP) Properties window that appears.
4. Click on USE THE FOLLOWING IP ADDRESS button
5. Enter the following: IP Address: 172.16.0.100 Subnet Mask: 255.255.0.0 if you are
connecting to a new (default) XN120.
If you are connecting via the customer LAN you should check your settings with the
network administrator.
6. Click OK. Then Click OK.
7. Close the NETWORK CONNECTIONS window.