Necta Kobalto User Manual

P285U00
05 - 2007
TECHNICIAN MENU
23
2.2.5 - 2 X BUTTON
2.2.6 - CHECk NO. SElEC.
2.2.7 - SET PROD. CODE
2.3 - MACHINE PARAM.
2.3.1 - BOIlERS TEMPER.
2.3.2 - TANk
2.2.5
double button
According to the model and to the external keypad, it is possible to
combine two buttons to a single selection.
2.2.6
checkIng the SelectIon number
Verifying the selection number (for direct selection models only)
associated to a button.
2.2.7
SettIng the product code
This function is used for assigning a 4-digit code to each selection
for processing the statistics.
2.3
machIne parameterS
2.3.1
boIler temperature
This function is used for setting the operating temperature, ex-
pressed in °C, of the boilers actually installed in the machine.
After selecting the boiler, press the conrm button “

”, the tem-
perature value on the display will start blinking and can be modied
as necessary.
2.3.2
tank
The machine water supply can be from the mains or from an
internal tank. For some applications it is also possible to use two
internal tanks at the same time.
With this function it is possible to dene whether the machine water
supply is from the mains (tank = 0) or from the tanks (tank = 1 or
2).
2.3.3 - ENAB.WASH BUTTON
2.3.3
enablIng the WaSh button
With this function it is possible to enable or disable the operation of
the mixer wash button.
Normally the button is disabled.

Necta Kobalto Specifications

General

Brand	Necta
Model	Kobalto
Category	Coffee Maker
Language	English