P285U00
05 - 2007
TECHNICIAN MENU
30
2.6.3 - PASSWORD
2.6.3.1 - SET PASSWORD
2.6.3.2 - ENABlE PASSWORD
2.6.3.3 - CNT RESET PWD
2.6.3.4 - JUG FACIlITY PWD
2.6.3.5 - FREE VENDING PWD
2.6.3.6 - kEYPAD lOCk PWD
2.6.3.7 - WASH PWD
2.6.3
paSSWord
This function is used for setting a password for accessing the
“Technician menu” mode.
2.6.3.1
SettIng the paSSWord
Enter a 5-digit numeric code to be set as password.
2.6.3.2
enablIng the paSSWord
This function is used for enabling or disabling the password re-
quest when accessing the “Technician menu” mode (disabled by
default).
2.6.3.3
counter reSet paSSWord
This function is used for setting the password for resetting the
counters set in the Technician menu 2.3.b
2.6.3.4
Jug facIlIty paSSWord
This function is used for setting the password for switching the
machine to jug facility mode.
2.6.3.5
free vendIng paSSWord
This function is used for setting the password for switching the
machine to free vending mode.
2.6.3.6
keypad lock paSSWord
This function is used for setting the password in order to lock the
selection keypad until the password in entered again.
2.6.3.7
WaSh paSSWord
This function is used for setting the password that must be entered
while in normal vending mode (with the door closed) for performing
a mixer wash cycle.