To Next Page

To Previous Page

P285U00

05 - 2007

TECHNICIAN MENU

2.6.3.8 - TEST SEl. PWD

2.6.3.9 - FIlTER RESET PWD

2.6.3.A - WASTE RESET PWD

2.6.4 - ENABlE FIll MENU

2.6.5 - ES UNIT

2.6.6 - AUT. UNIT WASH

2.6.3.8

teSt SelectIon paSSWord

This function is used for setting the password to access the

“Programming menu” mode and therefore also the test selections

made from the outside.

2.6.3.9

fIlter reSet paSSWord

This function is used for setting the password required for resetting

the message “Replace water lter” with the door closed and reset-

ting the counter after replacing the lter.

2.6.3.

WaSte tray reSet paSSWorD

This function is used for setting the password for resetting the se-

lection counters of the machine lock function for “Waste tray full”

2.6.4

enablIng the fIller menu

This function is used for determining which of the “Filler menu”

functions are to be left active and which are to be disabled. The

reference numbers of the menus do not change even if some are

disabled.

2.6.5

eSpreSSo unIt

This function is used for setting the standby position of the Z3000

espresso unit.

- OPEN brewing chamber open;

- CLOSED brewing chamber closed.

By default the position is set to OPEN.

2.6.6

automatIc unIt WaSh

This function is used for setting the daily unit wash of the espresso

unit by setting the time when it is to be performed. If setting the

time to 00.00 the function is disabled.

Necta Kobalto User Manual

Questions and Answers: