Necta Kobalto - Up-Key

P285U00
05 - 2007
TECHNICIAN MENU
45
5.4
up-key
5.4.1
Setup control
5.4.1.1
up-key -> vendIng machIne
When conrming this function after inserting the Up-Key in the spe-
cial port located on the C.P.U. board, it will be possible to select
the setup le from the list shown on the display using the scrolling
buttons, then when conrming with the conrm button the selected
setup will be loaded in the vending machine.
5.4.1.2
vendIng machIne -> up-key
When conrming this function after inserting the Up-Key in the spe-
cial port located on the C.P.U. board, it will be possible to save the
setup le to the Up-Key with the conguration present in that mo-
ment in the vending machine, indicating the name to be assigned
to the le (e.g.: KOBALTO000.STP).
5.4.1.3
delete
This function is used for deleting one by one the setup les present
in the inserted Up-Key.
5.4.1.4
delete all
This function is used for deleting all the setup les present in the
inserted Up-Key.
5.4.2
StatIStIcS management
5.4.2.1
vendIng machIne -> up-key
When conrming this function after inserting the Up-Key in the
special port located on the C.P.U. board, it will be possible to save
the statistics le to the Up-Key with all of the statistics les present
in that moment in the vending machine, indicating the name to be
assigned to the le (e.g.: KOBALTO000.STA).
5.4 - UPkEY
5.4.1 - SETUP MANAGEMENT
5.4.1.1 - UPkEY->MACHINE
5.4.1.2 - MACHINE->UPkEY
5.4.1.3 - DElETE
5.4.1.4 - DElETE All
5.4.2 - AUDIT MANAGEMENT
5.4.2.1 - MACHINE->UPkEY
5.4.2.2
delete
This function is used for deleting one by one the statistics les
present in the inserted Up-Key.
5.4.2.2 - DElETE
5.4.2.3
delete all
This function is used for deleting all the statistics les present in
the inserted Up-Key.
5.4.2.3 - DElETE All