P285U00
05 - 2007
TECHNICIAN MENU
44
5.3 - EVADTS
5.3.1 - PASS CODE
5.3.2 - SECURITY CODE
5.3.3 - CONNECTION
5.3
evadtS
The EVADTS (European Vending Association Data Transfer
System) communication protocol has 2 codes for identifying the
machine and for recognising the data transfer terminal.
5.3.1
paSS code
It is a four-digit alphanumeric code (0-9; A-F) that must be
the same as the one in the data transfer terminal to allow its
identication.
When pressing the conrm button the code is displayed as “0000”
regardless of the actual value; then by pressing the conrm button
the rst digit will start blinking.
Using the scrolling buttons, its value can be changed (during the
change operation the value becomes visible).
Repeat this operation for the 4 digits, after which the value is
stored and the display will indicate “0000” again.
5.3.2
SecurIty code
It is a further alphanumeric code for reciprocal recognition between
machine and EVADTS terminal.
Programming works as in the “Pass Code”.
5.3.3
connectIon
This function places the machine in wait mode for connection to
retrieve data.
To Next Page
Loading...
Need help?
General
