22
Chapter 3 . Connection
On the Home screen, tap Smart WLAN > Share WLAN password to proceed to QR code
screen (You can also tap the connected WLAN in the WLAN networks list to proceed to QR code
screen). You can share the password in following two ways:
• Show the QR code. For the other device, see Connect to WLAN by scanning the QR code.
• Touch and hold Password and choose Copy or Share to share the password.
Note:
This feature is currently only supported on Neffos and in some third-party apps.
Connect to WLAN by scanning the QR code
1. On the Home screen, go to Smart WLAN > Scan.
2. Align the QR code within the frame, or tap to select a photo to scan. Then your device will
connect to the shared WLAN automatically.
Note:
When ambient light is not enough, you can tap to turn on light.
WLAN extender
Use WLAN extender function to extend WLAN signals to a wider area.
• Extend the WLAN
Before using this feature, ensure that you have connected to the WLAN.
On the Home screen, tap Smart WLAN > WLAN Extender and turn on the switch. When
WLAN Extender is open, will appear in the status bar.
• Set WLAN Extender
On the Home screen, tap Smart WLAN > WLAN Extender > Set WLAN Extender. You can
configure following settings:
• Change the network name: Tap Name to set network name, and then tap SAVE. The Network
name is the WLAN Extender name. By default, this is the name of your phone model. You can
manually change the name to something that is easier to remember.
• Security: Your phone uses WPA2 PSK encryption by default.
• Configure a password that is easy to remember: The network password is generated
randomly by your phone. For security reasons, choose a password that is not easy to guess.
• Select AP Band: Tap Select AP Band to choose 2.4 GHz Band or 5 GHz Band.
• Set Maximum connections: Tap Maximum connection to choose the maximum connections.
• Set duration of WLAN Extender: Set the time for keeping WLAN extender on when idle. Tap
Keep WLAN extender on to choose the duration.
• Manage the users
On the Home screen, go to Smart WLAN > WLAN Extender. The connected and blocked
devices will be displayed on the list. Select any of the connected devices to set the following
options:
• View the details of the connected device: Tap a connected device to view the MAC address
and IP address.
• Block a device: Tap the connected device you want to block and tap BLOCK. The blocked
device can’t search your WLAN extender signals.
• Unblock a device: Tap the blocked device you want to unblock and tap UNBLOCK.
To Next Page
Loading...
