8 Nektar Aura Owner‘s Manual www.nektartech.com
Aura can be used as a generic MIDI pad controller or with the included Nektarine plugin and stand-alone software. When Aura is used with
Nektarine, most of the Internal mode features covered from page 9 to 13 are not needed because Nektarine handles the setup of pads
and control mapping. Having said that, you can use Internal mode Presets while Nektarine is running by pressing the [Internal] button and
also on tracks in your DAW that do not host Nektarine. The pads will reconfigure to the current Preset settings when you press the display
button [MIDI Assign] .
When Nektarine is used with Aura the sections of this manual, that are directly relevant, are:
• Global - LED Dim settings page 14
• Global - Pad Velocity Settings page 14-15
• Repeat page 16-17
• Step Sequencer page 18-26
The separate PDF guide that covers how Aura and Nektarine work together, can be located in the downloaded Nektarine package.
To get started with the process of downloading Nektarine, go back to page 5 and read the section called ‘Downloading Nektarine and
Nektar DAW Integration for Aura’.
Using Aura with Nektarine
To Next Page
Loading...
Need help?
General
