Neptune Technology ProCoder R900i - Off-Cycle Option; Belt Clip Transceiver

3. Click OFFCYCLE (option 4).
Figure 30 – Off-Cycle Option
4. Type the read ID and the password.
5. Click LOGIN.
6. Confirm the date and time are correct.
7. Click YES.
Belt Clip Transceiver
To pair the BCT, complete the following steps.
1. Change the date if you have a specific day to target.
2. Click INITIALIZE to pair with the R900 BCT.
3. Type the MIUID.
4. Click CAPTURE.
The reads come in just like the data logger reads. The data logger has 96 days of hourly
reads and off cycle has 96 days of daily reads.
28 ProCoder™)R900i™Installation and Maintenance Guide
Chapter 5: Data Logging Extraction