2. Attach the coaxial cable to the RF antenna.
Figure 82 – Coaxial Cable
3. Weatherize RF antenna connection using the weatherizing kit, as described in
"Recommended Tools and Materials" on page25.
4. Follow instructions in the weatherizing kit and the coaxial ground kits for proper
installation.
Figure 83 – Weatherizing RF Antenna
Do not hoist the antenna while attached to the coaxial cable. Doing so may damage the
antenna connector. Attach the coaxial after the antenna is hoisted and mounted.
R900
®
Gateway Installation and Maintenance Guide 63
Chapter 4: Install the Gateway
To Next Page
