In the Instantaneous Values menu, below parameters can be observed
by using UP, DOWN and SET buttons.
4. DISPLAYING OF INSTANTANEOUS VALUES
By pressing ESC button in any menu, Instantaneous Values menu
can be displayed.
This is the main menu of RM-12P. If you wait without pressing the buttons
in any menu, Instantaneous Values menu ýs displayed automatically.
When RM-12P is powered up at first time, Instantaneous Values menu
is displayed.
Cosj
Voltages
When device starts to operate, cosj values of the 3-phase are
displayed. Negative (-) sign represents that phase is capacitive
and positive (+) sign represents that phase is inductive. As you
can see in below example, first phase is capacitive, second and
third phases are inductive.
While observing cosj values, if SET button is pressed
(Har led lights), harmonic values can be observed up to 19th
harmonic (including odd harmonics).
When cosj menu is displayed, if DOWN button is pressed, total inductive
cosj and total capacitive cosj values are observed. As you can see in
below example, in first display, total inductive Cosj value and in third
display, total capacitive cosj value is displayed.
In the measurement mode, phase-neutral voltages can be displayed by
using UP/DOWN buttons when V led lights. When phase voltages are
displayed, if SET button is pressed (HAR led lights), odd harmonic values
(up to 19th harmonic) can be observed.
Cosj and HAR leds on the display represent that displayed values are
harmonic values of related cosj. By pressing SET button one by one,
all odd harmonic values can be observed up to 19th harmonic.
V and HAR leds on the display represent that displayed values are voltage
harmonic values. By pressing SET button one by one, odd harmonic
values (up to 19th harmonic) and THD values can be observed.
Currents
SPowers
Cosj
Energys
Active (W)
THD%I
-
-
Voltage
Apparent (VA)
S
Cosj
THD%V
-
-
-
-
-
-
L
N
Reactive (VAr)
Temperature
-
-
INTELLIGENT REACTIVE POWER MANAGEMENT
RM-12P
27
-.912
0.973
0.945
Total Cosj
1.000
-.947
225.5
228.7
223.4