27
Ness Guardpost Installation & Programming
SMS
Programming
GSM
Examples
To program ENTRY delay to be 10 seconds. In these examples the Guardpost’s
client account number is 1234:
Send this SMS to the Guardpost
1234,P05=10,E
Guardpost will reply with
Unit 1234: P05=10, programmed
Up to 7 general programming options can be programmed in one SMS message.
(PH1, PH2 and CL1 must be sent separately.)
For example:
To program multiple options in one message
1234,P05=10,P06=20,P08=01,E
Guardpost will reply with
Unit 1234: P05=10,P06=20,P08=01, programmed
To program example PHONE1 to be 9123 1234.
Send this SMS to the Guardpost
1234,PH1=91231234,E
Guardpost will reply with
Unit 1234: PH1=91231234, programmed
To program example PHONE1 to be 9123 1234 and PHONE2 to be 92220011.
Send this SMS to the Guardpost
1234,PH1=91231234,PH2=92220011,E
Guardpost will reply with
Unit 1234: PH1=91231234,PH2=92220011, programmed
To program example CLIENT account number to be 2468.
Send this SMS to the Guardpost
1234,CL1=2468,E
Guardpost will reply with
Unit 1234: CL1=2468, programmed
To delete PHONE1.
Send this SMS to the Guardpost
1234,PH1=-,E
Guardpost will reply with
Unit 1234: PH1=, programmed
To request a summary of all current program options.
Send this SMS to the Guardpost
1234,V,E
Guardpost will reply with
Unit 1234: P01=00,P02=03,
P03=24,P04=00,P05=05,P06=05,
P07=05,P08=01,P09=00,P10=00,
P11=00,P12=20,P13=07,P14=01,
P15=01,PH1=91231234,PH2=.....
PROGRAMMING BY SMS
NOTES
• SMS programming messages
must not include spaces.
• Some commands must be sent
in uppercase.
• Up to 7 options can be sent in
one SMS message.
• To delete a phone number, send
a hyphen ‘-’ in place of a phone
number.
• SMS acknowledgement
messages are sent to the
mobile phone which sent the
SMS commands - which can be
any mobile number. However
if PHONE 1 or PHONE 2 are
blank the dialler will not send
messages of any type.
To Next Page
Loading...
