Ness Guardpost - Programming by SMS

28
Ness Guardpost Installation & Programming
These options are available for programming by SMS. See page 25 for the full programming options table.
SMS program options summary
PROGRAMMING BY SMS
Program
Option
Name
SMS
Program
Option No.
(XX) Value (YY) Description Default
Page
No.
RANGE 01 00, 01 Onboard PIR range. 00 = Low, 01 = High LOW 19
PULSE 02 01, 02, 03, 04 Onboard PIR pulse count. 1 PULS
SUPVIS 03 00, 01, 04, 08, 16, 24 Supervision time in hours. 00 = Supervision disabled OFF
LOKOUT 04 00 Alarm Lockout. 00 = Disabled, 01 = Enabled OFF 20
ENTRY 05 05, 10, 15, 20, 25, 30 Entry delay in seconds 5 sec
EXIT 06 05, 10, 15, 20, 25, 30, 35,
40, 45, 50, 55, 60
Exit delay in seconds 5 sec
SIREN 07 01, 02, 03, 04, 05 Siren time in minutes 5 min
CHIRPS 08 00, 01 External Siren Chirps. 00 = Disabled, 01 = Enabled ON
OPEN 09 00, 01, 02, 03 Open Close Reports. 00 = Disabled, 01 = ON, 02 =
RESTOR, 03 = RES+OC
OFF 21
LOWBAT 10 00, 01, 02, 03 Low Battery Reporting. 00 = NONE, 01 = MAIN, 02 =
SENSOR, 03 = ALL
NONE
ABORT 11 00, 05, 10, 15, 20, 25, 30,
35, 40, 45, 50, 55, 60
Dialler Abort delay in seconds. 5 sec 22
MEDIC 12 00, 05, 10, 15, 20, 25, 30,
35, 40, 45, 50, 55, 60
Medical Key Abort delay in seconds. 20 sec 23
T-CALL 13 00, 01, 07, 14, 30 Test Call interval in days. 00=Test Calls disabled OFF
(7 DAY when
dialler = CID)
DIALER 14 00, 01, 02 Dialler reporting format
00 = Contact ID (CID), 01 = SMS, 02 = Audible
CID
POWER 15 01, 02, 03, 04, 05, 06,
07, 08
01 = BATT, 02 = BAT-30, 03 = BAT-1H, 04 = BAT-2H, 05
= AC-ON, 06 = SLR-30, 07 = SLR-1H, 08 = SLR-2H
BATT 24
CLIENT CL1 Up to 4 digits Client account number 0000 21
PHONE 1 PH1 Up to 20 digits Telephone No. 1 for reporting alarms by CID, SMS or
AUD
none 22
PHONE 2 PH2 Up to 20 digits Telephone No. 2 for reporting alarms by CID, SMS or
AUD
none
Only
available by
SMS
V Request current programmed options. Guardpost replies
with the current values of all programmed options
N/A –