98 • Trunks Element Manager User’s Manual Nimbra OneSerie
©2006 Net Insight AB, All rights reserved
Alarm indication signal, path
(AIS-P)
Alarm indication signal, path, defect detected
by upstream SONET/SDH network interface.
Remote defect indication, line
(RDI-L)
Remote defect indication, line, defect
detected by downstream SONET/SDH
network interface.
Remote defect indication, path
(RDI-P)
Remote defect indication, path, RDI-P, defect
detected by downstream SONET/SDH
network interface.
Payload mismatch (PLM) Payload mismatch.
Degraded signal (DEG) Degraded signal.
Loopback Loopback alarm, NA.
1. Navigate to the Trunks|Interface and then on the trunk interface that
should be edited, Figure 92, will appear.
2. Select whether to receive the alarms or not by marking the Suppress
Alarms or not.
3. Enter the Signal failure filter time, and click OK.
To Previous Page
Loading...
Need help?
General
