WAN/Fixed line connections (such as UFB)
b. Attach one end of the included Ethernet cable to the blue WAN port on the back of the router. Attach the other
end to your UFB’s Network Termination device.
Connecting via an Ethernet cable
If you want to connect your computer to the router via Ethernet cable, follow these instructions.
Connect an Ethernet cable
to one of the yellow LAN
ports on the back of the NF15ACV router.
Connect the other end of the Ethernet cable to your computer.
NOTE: There is only one Ethernet cable supplied. If you require more than one Ethernet cable, any standard CAT5e or CAT6
Ethernet cable is suitable.
To Next Page
Loading...
Need help?
General
