Admin
Commit/Reboot
This page is used to commit any configurational changes you have made and reboot the router so that they take effect.
Click the Commit and Reboot button to save settings and reboot the router.
Backup/Restore
You can save the current configuration of your Router to a file on your computer. This is highly recommended before you change
any configuration settings on the Router or before you upgrade your firmware. If any problem should occur after you have made
changes, you can use this page to restore the router to your previous settings.
System Log
The System Log page is useful for troubleshooting and is used to display a log of events that occur on the router. You can change
the level of logging as a means of filtering out the types of messages that you want to see. Additionally, you may save the log file to
your hard drive using the Save button.
To Next Page
Loading...
Need help?
General
