NetComm Wireless VDSL/ADSL Dual Band AC1200 WiFi Gigabit Modem Router with VoIP
To use the parental control feature, select the Enable option then click the Apply Changes button.
Enter a display name for the rule. This should be descriptive of the rule so that is easily identifiable in the list of rules.
Select the method used to identify the computer on the network. Remember that IP addresses may change while the MAC address of a
device is hard-coded and is more permanent.
If you selected IP address for the Specified PC option, enter the IP address of the computer to restrict in this field.
If you selected MAC address for the Specified PC option, enter the MAC address of the network adapter to restrict in this field. The MAC
address should be entered without any symbols between the characters.
Select the days to which this rule should apply.
Enter the time (in 24-hour format) that the rule should begin taking effect.
Enter the time (in 24-hour format) that the rule should stop taking effect.
When you have added all the details in the table above, click the Add button to add the rule to the Parental Control table. If you wish
to turn on the parental control feature, ensure that you have selected the Enable option at the top of the screen and then click the
Apply Changes button.
uPnP
Universal Plug and Play is designed to support zero-configuration “invisible” networking and automatic discovery for a wide range of
devices. This means that a device can dynamically join a network, obtain an IP address and broadcast its capabilities while learning
about the presence and capabilities of other network devices.
To Next Page
Loading...
Need help?
General
