NetComm Wireless NF15ACV User Manual

62
NetComm Wireless VDSL/ADSL Dual Band AC1200 WiFi Gigabit Modem Router with VoIP
www.netcommwireless.com
UM-00019 v1.0
TR-069
TR-069 is a protocol for communication between customer premises equipment (CPE) and an Auto Configuration Server (ACS). It
allows the auto configuration server to push requests to the router to perform certain activities, for example, a firmware upgrade.
FIELD
DESCRIPTION
ACS
URL
The Auto Configuration Server URL. For example, http://10.0.0.1:80 or https://10.0.0.1:443
User Name
The username that the NF15ACV should use when connecting to the ACS.
Password
The password that the NF15ACV should use when connecting to the ACS.
Periodic Inform
When this field is enabled, the NF15ACV will send an Inform RPC to the ACS server at the system startup, and will continue to send it
periodically at an interval defined in Periodic Inform Interval field; When this field is disabled, the NF15ACV will only send Inform RPC to the
ACS server once at the system startup.
Periodic Inform
Interval
Time interval in seconds to send the Inform message.
Connection Request
User Name
The username the remote ACS should use when connecting to the NF15ACV.
Password
The password the remote ACS should use when connecting to the NF15ACV.
Path
The path of the device ConnectionRquestURL. The device ConnectionRequestURL should be configured based on the Device_IP, Path and
Port as follows: http://Device_IP:Port/Path
Port
The port of the device ConnectionRequestURL.

NetComm Wireless NF15ACV Specifications

General

Brand	NetComm Wireless
Model	NF15ACV
Category	Network Router
Language	English