NetComm Wireless VDSL/ADSL Dual Band AC1200 WiFi Gigabit Modem Router with VoIP
VoIP
The NF15ACV provides a software architecture for telephony applications. The software consists of real-time voice and signal
processing software that perform many of the required telephony data processing functions.
VoIP enables telephone calls to be made over an IP network. The phones connected to the NF15ACV are standard analogue
phones that are identical to the other telephones connected to the Home telephone wiring system. The phones can use DTMF
dialling to make VoIP calls. The NF15ACV routes or receive calls over VoIP depending on the dialled telephone number or the way in
which an incoming call is received. QoS (Quality of Service) is also used to ensure voice calls are placed at a higher priority than
data traffic routed between the LAN and WAN interface.
Phone 1/Phone 2
Enter user name to be displayed.
Enter user name (or phone number) of the user.
Enter user name for authentication, maximum 39 characters.
Enter user password for authentication, maximum 39 characters.
Enable/Disable Proxy. Default: Disables
The IP address of SIP proxy
The port number used by SIP Proxy. Default: 5060
Assign domain name for the URL to be registered.
SIP registration expired time. Assigns the time interval from 1 – 65535. Default setting is 3600 seconds.
Enable: All outgoing requests will be sent to this outbound proxy. Default: Disabled
Specify the IP Address of SIP Outbound Proxy server. This field contains the URI string or the IP of the outbound proxy.
The port number of Outbound Proxy Server, assign a number from 1024 to 65535, default setting is 5060.
The phone’s registration status
To Next Page
Loading...
Need help?
General
