Advanced configuration
The NF15ACV router comes with pre-configured settings that should suit most customers. For advanced configuration, log in to the
web-based user interface of the router.
To log in to the web-based user interface:
Open a web browser (e.g. Google Chrome™, Mozilla Firefox®), type http://192.168.20.1 into the address bar and press
Enter. The log in prompt is displayed.
Figure 2 – Log in prompt for the web-based user interface
Enter the login username and password. If this is the first time you are logging in or you have not previously configured the
password for the admin account, you can use the default account details to log in. The default log in credentials are:
Username: admin
Password: admin
Note: For security reasons, we highly recommend that you change the password of the admin account upon initial
installation. You can do so by navigating to the Admin > Password.
The Status page is displayed when you have successfully logged in.
To Next Page
Loading...
Need help?
General
