NetComm Wireless VDSL/ADSL Dual Band AC1200 WiFi Gigabit Modem Router with VoIP
MAC Filtering
MAC Filtering is a method of allowing or denying a device access to the network by its MAC address. This method applies to both
LAN and WLAN clients.
Specifies the default action on the LAN to WAN bridging/forwarding path.
Specifies the default action on the WAN to LAN bridging/forwarding path.
The direction of the traffic.
The source MAC address assigned to the traffic for which filtering is applied.
The destination MAC address assigned to the traffic for which filtering is applied.
Deny or allow traffic when matching this rule.
URL Filtering
The URL filtering feature allows you to specify keywords that appear in a site’s domain name which are allowed or blocked when
someone on the network attempts to access the site.
To add a keyword to the URL blocking list:
Select the Enable option.
Click the Apply Changes button.
In the Keyword field, enter the keyword you wish to block.
Click the Add button.
To Next Page
Loading...
Need help?
General
