NetComm Wireless NF15ACV User Manual

40
NetComm Wireless VDSL/ADSL Dual Band AC1200 WiFi Gigabit Modem Router with VoIP
www.netcommwireless.com
UM-00019 v1.0
SIP Advanced
FIELD
DESCRIPTION
SIP Port
Assign the SIP port number of terminal adapter. Its range is 1024 to 65535, default setting is 5060 for FX0 and 5061 for FXS1.
Media Port
Enter the port for RTP Port number for initial of sending RTP packet. Its range is 1024 to 65535.
Default: 9000.
DTMF Relay
DTMFs are the tones generated by your telephone's keypad. Select the DTMF relay method. ATA supports 4 methods:
SIP INFO
RFC 2833
In-band pass through mode
Default: In-band pass through mode.
RFC2833 Payload Type
Specify the Out-band 2833 payload type value.
Default: 96
SIP Info Duration (ms)
Specify the Duration (ms) SIP INFO sounds on the telephony end of the call.
Call Waiting
Enable/Disable Call Waiting. Check with your VoIP Provider for Call Waiting support.
Default: Enable
Call Waiting Caller ID
Enable/Disable Call Waiting Caller ID. Check with your VoIP Provider for Call ID support.
Default: Disable
Reject Direct IP Call
Enable/Disable Reject Direct IP Call. Check with your VoIP Provider for IP Call check.
Default: Disable

NetComm Wireless NF15ACV Specifications

General

Brand	NetComm Wireless
Model	NF15ACV
Category	Network Router
Language	English