WPS
While WiFi networks have become ubiquitous around the world, many users still have difficulty in configuring a connection between
two devices. WPS is a method of simplifying the connection so that the user needs no knowledge of specific settings. The simplest
way of connecting two WPS certified devices is by pressing the WPS button (PBC) on each device within two minutes of each
other. If Push Button Connect is not supported by both devices, you can use the PIN method where a PIN is set on one device and
the other device must enter the PIN in order to authenticate on the network.
The NF15ACV supports both PIN and Push Button Connect (PBC) methods. To use PBC, no configuration is required.
To use the PIN method as the registrar:
Ensure that the Disable WPS item is not selected.
Press the Regenerate PIN button to have a random PIN generated automatically.
Click the Start PBC button to begin the WPS connection.
On your other device, press the WPS button and enter the Self-PIN Number to connect when prompted.
To use the PIN method as a client:
In the Client PIN Number field, enter the PIN from the other device.
Press the WPS button on the other device.
Press the Start PIN button on the NF15ACV interface.
To Next Page
Loading...
Need help?
General
