NETGEAR AV Series Hardware Installation Guide

Step 4: Mount or place the switch....................................................35
Mount the switch in a rack............................................................35
Place the switch on a flat surface.................................................36
Optional Step 5: Install SFP or SFP+ transceiver modules............37
Step 6: Connect devices to the switch.............................................38
Step 7: Check the installation...........................................................39
Step 8: Apply AC power and check the LEDs.................................39
Optional Step 9: Connect a console to the switch.........................40
Chapter 4 Troubleshooting
Troubleshooting chart.......................................................................43
PoE troubleshooting suggestions....................................................44
Additional troubleshooting suggestions.........................................45
4
AV Line of Fully Managed Switches M4250 Series

NETGEAR AV Series Specifications

General

Model	AV Series
Switching Capacity	Varies by model
Quality of Service	Yes
Jumbo Frame Support	Yes
Energy Efficient Ethernet	Yes
Ports	5, 8, 16
Layer	Layer 2
Mounting	Desktop
Speed	Gigabit Ethernet
Power Budget	Varies by model
Fanless Design	Yes