NETGEAR D6400 User Manual

Share a Storage Device
174
AC1600 WiFi VDSL/ADSL Modem Router Model D6400
A login screen displays.
3. Enter the user name and password for the modem router.
The user name is admin. The default password is password.
The user name and
password are case-sensitive.
4. Click the OK button.
The BASIC Home screen displays.
5. Select ADVANCED > USB Functions > ReadySHARE Storage.
The previous figure shows a USB device attached to the modem router.
6. In the Available Network Folders table, select a device.
7. Click the Safely Remove USB Device button.
The device goes offline and a pop-up screen displays.
8. Click the OK
button.
9. Physically disconnect the USB device.

NETGEAR D6400 Specifications

General

Product type	Tabletop router
Product color	Black
Ethernet WAN	Yes
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
WLAN data transfer rate (max)	1600 Mbit/s
WLAN data transfer rate (first band)	300 Mbit/s
WLAN data transfer rate (second band)	1300 Mbit/s
Networking standards	IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
3G	No
USB 2.0 ports quantity	2
Ethernet LAN (RJ-45) ports	5
Security algorithms	WPA, WPA-PSK, WPA2, WPA2-PSK
Cables included	LAN (RJ-45)
Power source type	AC
Supported network protocols	IPv6
Internal memory	128 MB

Weight and Dimensions

Depth	198.5 mm
Width	191 mm
Height	65 mm
Weight	422 g