NETGEAR FVS124G User Manual

Delete the VPN Policy
Configure the IKE Policy to use Mode Config
20
‣
The VPN policy must be removed before you
can change the IKE policy to use Mode Config
‣
Go to “VPN > VPN Policies”
‣
Select your VPN Policy
‣
Click “Delete”
‣
Go to “VPN > IKE Policies”
‣
Select your IKE Policy
‣
Click “Edit”
‣
In the “Remote” section, select “Remote Host
Configuration Record”
‣
Select the record you created earlier
‣
Click “Apply”

NETGEAR FVS124G Specifications

Power

power requirements	12V DC, 1.2A

System Memory

processor	200 MHz 32-bit RISC
memory	4MB Flash, 16MB DRAM

Ports & Interfaces

LAN ports	Four (4) 10/100/1000 Mbps auto-sensing, AutoUplink RJ-45 ports
WAN ports	Two (2) 10/100Mbps Ethernet RJ-45 ports

Weight and Dimensions

dimensions	7.45 x 4.85 x 1.26 in. (18.92 x 12.31 x 3.19 cm)
weight	1.37 lbs. (0.62 kg)