Configure Quality of Service
191
Insight Managed 8-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP Fiber Ports
14. Click the Apply button.
Your settings are saved.
The following table describes the nonconfigurable information displayed on the page.
Table 50. DiffServ policy configuration policy attribute
Field Description
Policy Name The name of the DiffServ policy.
Policy Type The type of the policy, which is always inbound (In).
Member Class Name The name of the class instance within the policy.
Rename an Existing DiffServ Policy
 To rename an existing DiffServ policy:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is of
f-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser
, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the Switch on page 11.
The login window opens.
4. Enter the switch’
s password in the password field.
The default password is password. If you added the switch to a network on the Insight
app before and you did not yet change the password through the local browser interface,
enter your Insight network password.
The System Information page displays.
5. Select QoS > DiffServ >
Advanced > Policy Configuration.
The Policy Configuration page displays.
6. Select the check box next to the policy name.
7. In the Policy Name field, specify the new name.
8. Click the Apply button.
Your settings are saved.
Change the Policy Attributes for an Existing DiffServ Policy
 To change the policy attributes for an existing DiffServ policy:
1. Connect your computer to the same network as the switch.
To Next Page
Loading...
Need help?
General
