NETGEAR GC110 User Manual

Manage Device Security
239
Insight Managed 8-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP Fiber Ports
4. Enter the switch’s password in the password field.
The default password is password. If you added the switch to a network on the Insight
app before and you did not yet change the password through the local browser interface,
enter your Insight network password.
The System Information page displays.
5. Select Security > Traffic Control > Private VLAN > Private Vlan Type Configuration.
The Private VLAN Type Configuration page displays.
6. Select the check box that is associated with the VLAN ID that you want to configure.
7. From the Private VLAN Type menu, select the type of private VLAN. Possible values are as
follows:
• Primary. Sets the private VLAN type as primary.
• Isolated. Sets the private VLAN type as isolated.
• Community. Sets the private VLAN type as community.
• Unconfigured. Sets the private VLAN type as unconfigured. The default is
Unconfigured.
8. Click the Apply button.
Your settings are saved.
Configure Private VLAN Association Settings
 To configure private VLAN association:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the Switch on page 11.
The login window opens.
4. Enter the switch’s password in the password field.
The default password is password. If you added the switch to a network on the Insight
app before and you did not yet change the password through the local browser interface,
enter your Insight network password.
The System Information page displays.
5. Select Security > Traffic Control > Private VLAN > Private Vlan Association
Configuration.
The Private VLAN Association page displays.
6. From the Primary VLAN menu, select the primary VLAN ID of the domain.

NETGEAR GC110 Specifications

General

Switch type	Managed
Quality of Service (QoS) support	Yes
Console port	RJ-45
Power connector	DC-in jack
SFP module slots quantity	2
Installed SFP modules quantity	-
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	8
Product color	Gray
10G support	No
MAC address table	- entries