Manage Device Security
273
Insight Managed 8-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP Fiber Ports
4. Enter the switch’s password in the password field.
The default password is password. If you added the switch to a network on the Insight
app before and you did not yet change the password through the local browser interface,
enter your Insight network password.
The System Information page displays.
5. Select Security >
ACL > Advanced > IPv6 ACL.
The IPV6 Configuration page displays.
6. In the IPv6 ACL field, specify a name to identify the IPv6
ACL.
This is the IPv6 ACL name string, which includes up to 31 alphanumeric characters only.
The name must start with an alphabetic character
.
7. Click the Add button.
The IPv6 ACL is added.
The following table describes the nonconfigurable information displayed on the page.
Table 65. IPv6 Configuration and IPv6 ACL Table information
Field Description
Current Number of ACL The current number of the IP ACLs configured on the switch.
Maximum ACL The maximum number of IP ACLs that can be configured on the switch.
Rules The number of the rules associated with the IP ACL.
Type The type is IPv6 ACL.
Delete an IPv6 ACL
 To delete an IPv6 ACL:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is of
f-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser
, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the Switch on page 11.
The login window opens.
4. Enter the switch’
s password in the password field.
The default password is password. If you added the switch to a network on the Insight
app before and you did not yet change the password through the local browser interface,
enter your Insight network password.
The System Information page displays.
To Next Page
Loading...
Need help?
General
