NETGEAR GC110 User Manual

Monitor the System
329
Insight Managed 8-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP Fiber Ports
Packets RX and TX 512-1023
Octets
The total number of packets (including bad packets) received and transmitted
that were between 512 and 1023 octets in length inclusive (excluding framing
bits but including FCS octets).
Packets RX and TX
1024-1518 Octets
The total number of packets (including bad packets) received and transmitted
that were between 1024 and 1518 octets in length inclusive (excluding framing
bits but including FCS octets).
Packets RX and TX
1519-2047 Octets
The total number of packets (including bad packets) received and transmitted
that were between 1519 and 2047 octets in length inclusive (excluding framing
bits but including FCS octets).
Packets RX and TX
2048-4095 Octets
The total number of packets (including bad packets) received and transmitted
that were between 2048 and 4095 octets in length inclusive (excluding framing
bits but including FCS octets).
Packets RX and TX
4096-9216 Octets
The total number of packets (including bad packets) received and transmitted
that were between 4096 and 9216 octets in length inclusive (excluding framing
bits but including FCS octets).
Octets Received The total number of octets of data (including those in bad packets) received on
the network (excluding framing bits but including FCS octets). This number can
be used as a reasonable estimate of Ethernet utilization. If greater precision is
required, sample the etherStatsPkts and etherStatsOctets objects before and
after a common interval.
Packets Received 64 Octets The total number of packets (including bad packets) received that were
64
octets in length (excluding framing bits but including FCS octets).
Packets Received 65-127
Octets
The total number of packets (including bad packets) received that were between
65 and 127 octets in length inclusive (excluding framing bits but including FCS
octets).
Packets Received 128-255
Octets
The total number of packets (including bad packets) received that were between
128 and 255 octets in length inclusive (excluding framing bits but including FCS
octets).
Packets Received 256-511
Octets
The total number of packets (including bad packets) received that were between
256 and 511 octets in length inclusive (excluding framing bits but including FCS
octets).
Packets Received 512-1023
Octets
The total number of packets (including bad packets) received that were between
512 and 1023 octets in length inclusive (excluding framing bits but including
FCS octets).
Packets Received 1024-1518
Octets
The total number of packets (including bad packets) received that were between
1024 and 1518 octets in length inclusive (excluding framing bits but including
FCS octets).
Packets Received > 1518
Octets
The total number of packets received that were longer than 1518 octets
(excluding framing bits, but including FCS octets) and were otherwise well
formed.
Total Packets Received
Without Errors
The total number of packets received that were without errors.
Table 74. Detailed port statistics (continued)
Field Description

NETGEAR GC110 Specifications

General

Switch type	Managed
Quality of Service (QoS) support	Yes
Console port	RJ-45
Power connector	DC-in jack
SFP module slots quantity	2
Installed SFP modules quantity	-
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	8
Product color	Gray
10G support	No
MAC address table	- entries