NETGEAR GC110 User Manual

Hardware Specifications and Default Values
365
Insight Managed 8-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP Fiber Ports
Interface
Admin Mode Disabled
82 Option Trust Mode Disabled
PoE
Global
System Usage Threshold 95%
Power Management Mode Dynamic
Traps Enabled
Interface
Admin Mode Enabled
Port Priority Low
Power Mode GC110P: 802.3af
GC510P: 802.3at
GC510PP: 802.3at
Power Limit Type User
Power Limit (mW) 30000 (mW)
Detection Type IEEE 802
Timer Schedule None
Virtual LAN (IEEE 802.1Q
Default VLANs 1 (Default)
All ports are members of the default VLAN.
4089 (Auto-Video)
No ports are members of the Auto-Video VLAN.
PVID 1
Acceptable Frame Types Admit All
Ingress Filtering Disabled
Port Priority 0
Jumbo Frames
Maximum Frame Size 1518
Flow Control
Admin Mode Disabled
Table 80. Feature Default Values and Default State (continued)
Feature Name/Parameter Default

NETGEAR GC110 Specifications

General

Switch type	Managed
Quality of Service (QoS) support	Yes
Console port	RJ-45
Power connector	DC-in jack
SFP module slots quantity	2
Installed SFP modules quantity	-
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	8
Product color	Gray
10G support	No
MAC address table	- entries